Xerox 4500 PS TR instruction manual Sample minimum configuration file, Idaps

Configuration

Xerox 4500 PS TR

3.6.1 Sample minimum configuration file

&&??##N1,0# : Start of file - Don’t remove this!

Short configuration for a PrintServer

(This is an example. Please modify the parameters to match your configuration).

00XXX00X

**********************************************************************

IDAPS

**********************************************************************

BEGIN_CONFIGURATION	IDAPS
ENABLE_TCPIP	YES	; ENABLE TCP/IP protocol
ENABLE_802_2	YES	; ENABLE 802.2 protocol
ENABLE_NETWARE	NO	; ENABLE Netware protocol
ENABLE_PU_LU	NO	; DISABLE PU/LU protocol
ENABLE_NETBEUI	YES	; ENABLE NetBEUI protocol
BOOT	YES	; Reboot PS if conf.has changed

**********************************************************************

TCPIP

**********************************************************************

BEGIN_CONFIGURATION TCPIP
BOOT	YES	;	BOOT from BOOTP server
DEFAULT_IP	192.0.0.1	;	IP addr. if not booted by BOOTP
DEFAULT_SM	255.255.255.0; Subnet Mask if not booted by BOOTP
DEFAULT_GW	192.0.0.0	; Gateway addr. if not booted by BOOTP
END

;****************************************************************************

P U

;**********************************************************************

BEGIN_CONFIGURATION PU
; BLOCKNUMBER	05D	; Fill in your Block					number
; IDNUMBER	00000	;	Fill	in	your	ID number
; REMOTE_MAC	400000000000	;	Fill	in	HOST	/ GW	MAC	address.
END

;*********************************************************************

NETWARE

;*********************************************************************

BEGIN_CONFIGURATION NETWARE
LSL_FRAME_802_2	YES	; Use 802.2 protocol
LSL_FRAME_802_SNAP	NO	; Disable	SNAP protocol
NCP_MODE	DS	; BINDERY	or DS, match server
NCP_PREFERRED_SERVER	XXXXXXXXX	; Name of	fileserver
NCP_PREFERRED_DSTREE	XXXXXXXXX	; NetWare	4.x	only
NCP_DSNAME_CONTEXT	XXXXXXXXX	; NetWare	4.x	only

**********************************************************************

802.2

**********************************************************************

BEGIN_CONFIGURATION 802_2
ALIASNAME	XXXXXXXXX	; Shown in the idaPMUTL window

**********************************************************************

IDA802_2 ID 1

**********************************************************************

BEGIN_CONFIGURATION 802_2 1
INSTREAM_802_2	NATIVE	; Transparent print

**********************************************************************

ENP ID 1

**********************************************************************

BEGIN_CONFIGURATION ENP 1
PRINTERNUMBER	XXXXXXXXX	; Capture			printer 0 on Novell server
FILESERVER	XXXXXXXXX	; Name		of	fileserver
PRINTSERVER	XXXXXXXXX	;	Name	of	printserver
MODE	XXXXXXXXX	;	BINDERY		or DS, match server

../continued

68