Xerox 4500 PS TR EU US language settings, National language selection Cpgid IPC, Example

Installation

Xerox 4500 PS TR

2.1.2 EU - US language settings

ON

OFF 1 2 3 4

Dip switch number 2 is used for language setting.

You can select between EU and US language settings.

Should you need to change language setting, set dip switch number 2 as follows:

EU language setting - set the switch to OFF

US language setting - set the switch to ON

2.1.3 National language selection - CPGID (IPC)

When you have selected either EU or US settings, you should also check that you have the correct default codepage for your national language.

Use the program MakeITDS - supplied with this kit - to change the CPGID. In the following you will find guidelines for entering the CPGID default value in the MakeITDS program.

Make a settings printout (e.g. via the test key) containing IPDS settings and the IPDS resident codepages. The IPDS settings will state the default codepage (CPGID - Code Page Global ID). See the example of the IPDS settings in the following.

Example:

IPC - SETTINGS PRINTOUT

Firmware Version :Sxx xxx xxx

Basic Information

Installed	Memory	:	2 Mbytes
Installed	Interface	:	Token Ring

IPDS Setup

IBM Emulation	: 4028
Default Codepage (CPGID)	: 01F4H (500)
Codepage Version	: 1

17