Xerox 4500 PS TR instruction manual 095XXYZZ.B80, B80 Microcode level 2, xerox product

Appendix Section

Xerox 4500 PS TR

∙On AIX, you must ensure general read access to the microcode file (TFTP users have login "nobody").

The microcode filename has the fol lowing format and should not be changed:

095XXYZZ.B80

where

XXrepresents version Y represents variant

ZZ represents release no. - generally not stated.

e.g.: 095022.B80

(microcode level 2, xerox product (2))

∙ Ensure that TFTP read access to this file is allowed.

4.Restart the BOOTP server. The Xerox 4500 PS TR checks for new microcode.

5.Power the Xerox 4500 PS TR off and back on again.

NOTE:

A microcode upgrade will only be performed if the name of the microcode file is different from the name of the version currently operating in theXerox 4500 PS TR.

6.“PSX3 5108 Awaiting microcode download” message is now printed.

7.During download, the LEDs will be blinking alternately.

8.Now print a Test Page (by pressing Test button) and check that the Version number on the test printout has changed to the new Version (see the following section: “Problem Determination”).

177