Xerox 4500 PS TR instruction manual Novell Setup for IPX/SPX

Novell Setup for IPX/SPX

Xerox 4500 PS TR

4. Novell Setup for IPX/SPX

This chapter provides instructions as to the configuration of Novell NetWare to connect the PrintServer using the IPX/SPX protocol.

The PrintServer is able to run with NetWare v.3.1x in BINDERY emulation as well as v.4.xx (the latter being backwards compatible) in Directory Services (DS) or BINDERY emulation.

The PrintServer supports printing through an embedded PSERVER (EPS) fully emulating a standard NetWare PSERVER.NLM. Printing through the embedded NPRINTER (ENP) can also be performed. Up to two ENPs is supported.

The Novell NetWare protocols supported are: SPX, SAP, NCP and IPX.

The NetWare set-up consists of the following basic steps:

∙Check the pre-requisites (described in the section “Before you begin” in the following).

∙Check that the connection with the NetWare server has been established by printing a file e.g. from a NetWare connected client.

The following sections will guide you through the configuration of the Novell NetWare for IPX/SPX printing on the PrintServer using standard NetWare tools.

87