Description of Menu Items

Item

Description

 

 

Image Enhance

Selects whether to perform image enhancement.

 

Image enhancement is a feature that makes the boundary line between black and

 

white smoother to decrease jags and enhance the visual appearance. The default is

 

On.

 

 

 

Hex Dump

Specifies whether to print the data sent from a computer in the ASCII code

 

corresponding to the hexadecimal notation format in order to check the data

 

contents. The default is Disable.

 

 

Draft Mode

Specifies whether to print in draft mode. The default is Disable.

 

 

Line Termination

Sets the line termination.

 

Off (default)

 

 

The line termination command is not added.

 

 

CR=CR, LF=LF, FF=FF

 

Add-LF

 

 

The LF command is added.

 

 

CR=CR-LF, LF=LF, FF=FF

 

Add-CR

 

 

The CR command is added.

 

 

CR=CR, LF=CR-LF, FF=CR-FF

 

CR-XX

 

 

The CR and LF commands are added.

 

 

CR=CR-LF, LF=CR-LF, FF=CR-FF

 

 

Default Color

Specifies the color mode to Color or Black. This settings is used when the color printing

 

mode setting is not specified for the print job that is sent to the printer.

 

Black (default)

 

 

Prints in black and white mode.

 

Color

 

 

Prints is the color mode.

 

 

 

PostScript Setup

Specifies the PostScript settings.

Item

Description

 

 

PS Error Report

Turns error reporting on or off.

 

 

PS Job Time-Out

Turns the time-out off, or selects the length of time before timing-out.

 

 

Init PS Disk

Initializes the HDD area that PostScript uses.

 

 

Paper Select Mode

Selects a paper tray.

 

 

Default Color

Sets the default as Color or Black.

 

 

Phaser® 6280 Printer

103

Page 102
Image 102
Xerox Phaser 6280 manual PostScript Setup, Add-LF, Add-CR, Color