Printing on Specialty Media

Loading Transparencies

Note: Transparencies with a white frame and full-color transparencies cannot be used.

1.After carefully fanning a small stack of transparencies, load them into Tray 1 (MPT) with the side to be printed facing down. Load no more than 25 transparencies at a time.

6280-011

2.Slide the paper guides to the size of the transparencies.

3.Pull out the output tray extension when loading paper, such as transparencies.

Printing on Transparencies

When MPT Mode is set to Panel Specified, you need to set the paper type and size settings for the tray on the control panel in advance. See Setting Paper Types and Sizes on page 50.

Printing transparencies continuously may lead to the output transparencies sticking to each other. Remove the transparencies from the output tray after about 20 sheets, and then fan them to lower their temperatures.

Using the PostScript Driver

To print on transparencies using the PostScript print driver, display the Paper/Output tab.

1.From the File menu, select Print.

2.Select this printer as the printer to be used and click Preferences or Properties.

3.Select the Paper/Output tab.

4.From Paper Type, select Transparency.

5.From Paper Tray, select Tray 1 (MPT).

Phaser® 6280 Printer

68

Page 68
Image 68
Xerox Phaser 6280 manual Loading Transparencies, Printing on Transparencies