Control Panel Menus

Changing Menu Settings

Changing the Power Saver Time

In this example, you set the transitional time to the Power Saver Mode.

1.To display the menu screen, press the Menu button at the print screen.

2.Press the Up Arrow or Down Arrow button until Admin Menu is displayed, and then press the Forward Arrow or OK button.

3.Press the Up Arrow or Down Arrow button until System Setup is displayed, and then press the Forward Arrow or OK button.

4.Press the Up Arrow or Down Arrow button until PowerSaver Time is displayed, and then press the Forward Arrow or OK button.

5.Press the Up Arrow or Down Arrow button to change the number of minutes that the printer will wait before entering Power Saver mode.

6.Press the OK button to confirm your settings. The settings that have been confirmed are displayed with the affix “*”.

7.Press the Menu button to quit the menu operation and return to the print screen.

8.Ready to print.

Note: If you want to change values after you have confirmed them by pressing the OK button, you need to set them from the start again.

Initializing Configured Values

Display the item you want to initialize, and then press both the Up Arrow and Down Arrow buttons at the same time.

Once the change process is completed, the factory defaults will be displayed. Press the OK button to confirm the value.

Phaser® 6280 Printer

92

Page 91
Image 91
Xerox Phaser 6280 manual Changing Menu Settings, Changing the Power Saver Time, Initializing Configured Values