Xerox 470 DC manual Getting a Secure Print for ST models, At the Workstation, Select Secure Print

Getting a Secure Print (for ST models)

Follow these steps to get a secure print.

At the Workstation

1.In the Windows print driver, click Properties to get to a Document Centre Print Driver.

2.Once in the Document Centre Print Driver select the Paper/Output Tab and click the Job Type pull down menu.

3.Select Secure Print.

4.Select Secure Print Setup, enter a 4-Digit Secure Print ID then click OK.

5.When you are ready to retrieve your secure print job go to the Document Centre.

At the Document Centre

1.Press the Job Status button to display the job queue. Touch your held job on the touch screen. It should be easily identified by the file name.

2.This will display a screen with additional options.

3.Press Release Job. You will be prompted for the Secure Print ID you assigned the job at your workstation.

4.As soon as the correct Print ID is entered, your job will print.

Page 32 Xerox Document Centre User Guide