Copying Bound Documents using Build Job
Typical Application
Copy a multipage article that is spread throughout a bound document all at once.
Procedure
1.Open the Document Cover and place the bound original on the Document Glass. Align the spine of the bound document with the Book Binding mark.
2.Make your programming selections by touching the screen. The most common selections are on the Basic Copying Tab (Output,
3.Use the keypad to enter the number of copy sets.
4.Depending on the configuration of your machine press the More Copy Features Tab or the Job Assembly Tab. If the More Copy Features Tab is selected press the Job Assembly Tab.
5.Select Build Job then the Build Job On button. Press Save.
6.Press the Bound Originals button then press the button that identifies which pages you want to copy.
7.Press the Start ( ) button.
8.Repeat this process until all the pages you want to copy have been scanned.
9.Press End Build Job.
Page 48 | Xerox Document Centre User Guide |