Using Build Job and Sample Set
Typical Application
Produce multiple sets of a document where individual segments require unique feature program selections.
Procedure
1.Load the originals for the first job segment.
2.Press the Basic Copy Tab and program the appropriate features for the first segment of the job.
3.Depending on the configuration of your machine press the More Copy Features Tab or the Job
Assembly Tab. If the More Copy Features Tab is selected press the Job Assembly Tab.
4.Press Build Job then press the Build Job On button. Press the Save button. Select Sample Set and Save to produce a single complete set for review.
5.Press the Start ( ) button.
The appearance of the End Build Job button indicates that the machine is in the image collection mode.
6.Repeat this procedure for each remaining segment.
7.After the final segment has been scanned press End Build Job.
A single review set will be produced because Sample Set was selected.
8.After you review the initial set, press the Job Status button to display a listing of queued jobs.
9.Touch your job to select it.
10.If you are satisfied with your initial set press Release. Otherwise, delete it and start again.
Try These Jobs
Xerox Document Centre User Guide | Page 49 |