User Safety Summary
Your printer and the recommended consumable supplies have been designed and tested to meet strict safety requirements. Attention to the following notes will ensure the continued safe operation of your printer.
The Phaser 7700 complies with international safety standards and is certified as a Class 1 Laser Product. With specific regard to lasers, the equipment complies with laser product performance standards set by governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light, as the beam is totally enclosed during all modes of customer operation and maintenance.
Electrical Safety
■Use the power cord supplied with your printer.
■Do not use a ground adapter plug to connect the printer to a power source receptacle that lacks a ground connection terminal.
■Plug the power cord directly into a properly grounded electrical outlet. Do not use an extension cord. If you do not know whether an outlet is grounded, ask an electrician to check the outlet.
Warning
Avoid the potential of severe electrical shock by ensuring that the printer is properly grounded.
■Do not place the printer where people may step on the power cord.
■Do not place objects on the power cord.
■Do not obstruct the ventilation openings. These openings are provided to prevent overheating of the printer.
Warning
Do not push objects into slots or openings on the printer. Making a contact with a voltage point or shorting out a part could result in fire or electrical shock.
■If you notice unusual noises or odors, switch off the printer power immediately. Disconnect the power cord from the electrical outlet. Call an authorized service representative to correct the problem.
■The power cord is attached to the printer as a
Note
Leaving the printer on is recommended for optimum performance, and does not pose a safety hazard.
xii | Phaser 7700 Color Printer |
