Xerox manual Using non-Phaser 7700 transparency film

Transparencies

Using non-Phaser 7700 transparency film

The printer features a unique oil-less fuser. Phaser 7700 Premium Transparency film is designed specifically to work with the printer's fuser. If you wish to use non-Phaser 7700 transparency film you must use film that meets the following specifications:

■Compatible with oil-less fuser systems

■Fusing temperature: 165C

■Thickness: 4.7 mil (120 micrometer)

■Stiffness: 250 mgf Gurley Units minimum

Transparency film that does not meet these specifications can produce poor image quality, jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some non-Phaser 7700 transparencies have paper tape on the leading edge that can separate in the heat of the fuser, leading to damage. Using non-Phaser 7700 transparencies may damage the fuser. Damage caused by using non-supported media may not be covered under the warranty, service agreement, or Total Satisfaction Guarantee.

If there is a jam in the fuser when using a non-Phaser 7700 transparency, the print job is cancelled and cleaning pages are automatically sent through the printer.

Note

Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers are not meant to be used with the Phaser 7700 printer. Using them may damage the fuser and may not be covered by the warranty.

32 Phaser 7700 Color Printer