Energy saver
After a predefined period of time since its last activity, the Phaser 7700 printer enters ENERGY STAR® standby mode. In this mode, the printer systems are shut down. When a print job is sent to the printer, it will wake up the printer. You can also wake the printer by pressing the OK key on the front panel.
You may find that the printer is going into ENERGY STAR standby mode too often and you do not want to wait for your print jobs while the printer is waking up. If you want to extend the length of time before the printer goes into ENERGY STAR mode, use the following procedure:
1.With Menus highlighted, press the OK key.
2.Scroll to Printer Setup Menu by pressing the Up or Down Arrow key.
3.Press the OK key.
4.Scroll to Set Energy Star Timeout by pressing the Up or Down Arrow key.
5.Press the OK key.
6.Increase the amount of time the printer can be idle before going into ENERGY STAR mode by pressing the Up Arrow key.
7.Press the OK key.
Features
User Guide | 15 |
