Xerox 7700 manual Loading transparencies in Tray

c.Select Phaser 7700 Transparency by pressing the Down or Up Arrow key.

d.To save your selection, press the OK key.

e.Select the paper size by pressing the Up or Down Arrow key.

f.To save your selection, press the OK key.

Loading transparencies in Tray 1

1.Pull out the tray.

2.Adjust the width and length guides to match the size of the transparencies.

3.Insert a stack of transparencies into the tray.

■Place the transparencies long-edge feed (LEF).

■Place transparencies with the white mark entering the printer first and the notch in the back-rightcorner of the tray.

Transparencies

0806-84

4.Do not load transparencies above the fill line because it may cause

ajam.

5.Reinsert the Universal tray.

6.Enter the paper type on the front panel.

a.Select Phaser 7700 Transparency by pressing the Down or Up Arrow key.

b.To save your selection, press the OK key.

User Guide 31