Setting the timers
To set the Power Saver mode and Rest mode timers:
1.Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter.
2.Press the Previous or Next key until TIMERS is displayed.
3.Press the Enter key to select TIMERS. The current setting for the READY TO POWER SAVER option is displayed.
4.Do one of the following:
•To select the READY TO POWER SAVER option, press the Enter key.
•To select the POWER SAVER TO REST option:
-Navigate to it by pressing the Previous or Next key.
-Press the Enter key to select the option.
5.Press the Previous or Next key to scroll through the range of values.
6.When you scroll to the desired value, press the Enter key to save your selection.
7.Press the
•The
•The display will indicate "XES SYNERGIX 8850 IDLE."
Adjusting the print density
To adjust the print density:
1.Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter.
2.Press the Previous or Next key until PRINTER ADJUSTMENTS is displayed.
3.Press the Enter key to select PRINTER ADJUSTMENTS. The current setting for the DENSITY option is displayed.
4.Press the Enter key to select DENSITY.
5.Press the Previous or Next key to scroll through the range of values.
6.When you scroll to the desired value, press the Enter key to save your selection.
7.Press the
•The
•The display will indicate "XES SYNERGIX 8850 IDLE."
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL | 23 |
