PROBLEM SOLVING
Problem solving table
The table below lists some conditions that may occur during the operation of the printer. You may be able to resolve the problems by following the suggested solutions in the table. For problems beyond the scope of this table, call for service.
Table 4. Problem-solving table
Condition | Causes | Suggested Solutions |
|
|
|
Portions of the prints are deleted. | The media may be damp. | Check the condition of the media. If |
|
| damp, replace it. |
The prints are light overall. | The print density may be too light. | Use the Printer Menu to adjust the |
|
| print density. Refer to "Adjusting |
|
| the print density" in this manual. |
| The media may be too damp. | Use a sealed media drawer. |
|
|
|
The tracing paper has wrinkles. | The media may be too dry. | Use a sealed media drawer. |
|
| Store the media in a sealed |
|
| package or bag. |
44 | XES SYNERGIX 8850 PRINTER OPERATOR MANUAL |
