MEDIA
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 13
16. Rotate the media rol l to feed the media under the baffle and
beyond the registration window.
NOTE: Ensure that the lead edge of the media is flat and is
not folded over itself.
17. Squeeze the baf fle release and lower the baffle until it locks in
place on both sides.
18. Slowly rotate the m edia roll until the lead edge of the media is
centered in the registration window.
19. Do one of the follo wing:
• If the drawer is a sealed media dr awer, close the Plexiglas
cover.
• If the drawer is not a sealed m edia drawer, proceed to
step 20.
20. Close the roll m edia drawer.
21. Lower the output tra y.
22. If the size or t ype of the new media roll is different from that of
the old media roll, you must specify the new size and t ype.
Refer to "Changing the roll media size and type" in this chapter
for instructions on entering the new roll media inf ormation.