Printer Driver Settings
Printer Driver Settings
| Always make sure that you select the Paper source, Paper |
| type, and Paper size features in your printer driver that |
| correspond to the printing media you intend to use. This |
| is particularly important for color printing. |
| A color calibration in the driver is set specifically for each |
| of the different types of media handled, so an incorrect |
| setting will result in less satisfactory output. |
Driver Features | The DocuPrint C15 driver supports the features listed in |
| Table 3.1. |
Table 3.1 DocuPrint C15 Driver features
Feature |
| Description and Values |
|
| |
Copies | Specifies the number of copies to be printed. | |
|
| |
Orientation | Defines the way the image is printed on paper. | |
| • | Portrait: For most paper types, Portrait is tall. |
| • Landscape: For most paper types, Landscape is wide. | |
| • | Mirror Effect: Is applied automatically if you select Transfer in the Paper type list. |
|
| |
Output | Specifies the order in which the pages of a job exit from the printer. | |
| • Collate: Prints the job beginning with the first page. There are two choices: | |
|
| - 1,1; 2,2; 3,3; prints all the copies of each page in a set beginning with the first |
|
| page. This is the default. |
|
| - 1,2,3; 1,2,3; prints all the pages of each set beginning with the first page before |
|
| the next set of copies is generated. |
| • | Reverse page order: Prints the set beginning with the last page |
|
| printing). |
|
|
|
|
| Table 3.1 Page 1 of 3 |
|
|
|
