|
| Printer Buttons |
Table 3.4 Indicator light states (continued) | ||
|
|
|
Status of light |
| Condition/Corrective Action |
|
| |
Flashing rapidly | Check for the following conditions and perform the appropriate corrective action: | |
| • | If the printer is out of paper, load paper and press the RESUME button. |
| • If paper is jammed, clear the jam and press the RESUME button. | |
| • | If a print cartridge is installed in the incorrect carriage or not installed, |
|
| replace or reposition the cartridge. The printer will then initialize and the |
|
| Indicator Light will remain lit. |
| If none of these actions resolve the problem, Power Off the printer and | |
| disconnect it from the electrical power supply. | |
| • Make sure that the print cartridge carriage and feeder paths are not | |
|
| obstructed. |
| • Then reconnect and Power On the printer. | |
| If the Indicator Light continues to flash rapidly, disconnect the printer and contact | |
| the Xerox Customer Support Center. | |
|
|
|
|
| Table 3.4 Page 2 of 2 |
|
|
|
Chapter 3: Printing ❖
