Xerox D60327 instruction manual 12. AS/400 SCS-DCA Printing Using TCP/IP, PS23OUTQ

AS/400 SCS-DCA Printing Using TCP/IP

Xerox 4500 PS TR

12. AS/400 SCS-DCA Printing Using TCP/IP

This chapter provides:

AS/400 definitions for SCS/DCA printing

Once these parameters have been configured, and the basic TCP/IP installation of the Xerox 4500 PS TR (equipped with an FSL top) has been completed, direct SCS/DCA will be possible. This will off-load the AS/400 as Host Print Transform is not used.

Requirements:

-AS/400 version 3.1 or higher with TCP/IP installed and a TCP/IP configured Xerox 4500 PS TR (equipped with an FSL top) with 5250 emulation

12.1Create a remote output queue

The CRTOUTQ command is used to create a Remote output queue. This will enable the AS/400 to automatically output SCS/DCA data directly to an Xerox 4500 PS TR (equipped with an FSL top).

The following example shows the values required to create queue called

PS23OUTQ.

Create Output Queue (CRTOUTQ)

Type choices, press Enter.
Output queue	. . . OUTQ	> PS23OUTQ
Library	. . .	*CURLIB
Maximum spooled file size:	MAXPAGES
Number of pages . . . .	. . .	*NONE
Starting time	. . .
Ending time	+.for. .more values
Order of files on queue . . . . SEQ		*FIFO
Remote system	. . . RMTSYS	> *INTNETADR
Remote printer queue . . .	. . . RMTPRTQ	> LPDPRT1SCS
Writers to autostart . . .	. . . AUTOSTRWTR	> 1

The value LPDPRT1SCS used for RMTPRTQ must match the SCS printer queue defined in the Xerox 4500 PS TR (equipped with an FSL top). The default value is LPDPRT1SCS.

118