Xerox D60327 Enablepulu, Boot, Sharetimeout, Holdtimeout, Irqtimeout, Psname, Contactperson

Appendix Section

Xerox 4500 PS TR

ENABLE_PU_LU

Description:	Enables or disables the use of the NetWare (IPX/SPX)
	protocols.
Range:	NO (0)
	YES (1)
Default:	YES
BOOT	The BOOT parameter causes the Xerox 4500 PS TR
Description:
	to compare new and old settings.
	If the current configuration is identical to the new
	setting, the latter will become non-operational. If on
	the other hand the new setting is differen t from the
	current, the Xerox 4500 PS TR is rebooted immediately.
Range:	NO (0)
	YES (1)
Default:	N/A

SHARETIMEOUT

Description:	Sets the share timeout value
Range:	0 - 9999 secs
Default:	20 secs
HOLDTIMEOUT
Description:	Sets the hold timeout interval for an Offline condition.
Range:	0 - 9999 secs
Default:	600 secs
IRQTIMEOUT
Description:	Sets the IRQ timeout value. Paper Error / Paper out
	conditions
Range:	0 - 9999 secs
Default:	60 secs
PS_NAME
Description:	An administratively assigned name for the managed
	node. By convention, this is the node’s fully qualified
	domain name.
Range:	255 ASCII characters
Default:	--

CONTACT_PERSON

Description: Textual identification of the contact person for this managed node together with information on how to contact this person.

Range: 255 ASCII characters Default:

160