Xerox D60327 Does the LED status of theXerox 4500 PS TR appear normal?, Unable, Able

Problem Determination

Xerox 4500 PS TR

Does the LED status of theXerox 4500 PS TR appear normal?

∙Check for status of the LEDs.

Can you PING theXerox 4500 PS TR ?

∙If not, the reason may be that one of the bridges is actually a router. In that case, the Xerox 4500 PS TR and PSF/2-PSF/AIX should have different IP network IDs. PSF2/PSF6000 should have a default router and the Xerox 4500 PS TR should be configured with a gateway address.

∙You may also have used an invalid IP address in network.

Refer to the section : ”Testing the Xerox 4500 PS TR ”for a description of how to "PING".

Are you unable / able to generate a test printout?

Unable:

∙ Check the connection and the configuration to the BOOTP server.

∙Check the status of the attached PCL printer.

Able:

∙Check the configuration of PSF/2 or PSF/AIX.

∙Check the connection from the Xerox 4500 PS TR to the PSF/2 or PSF/AIX servers.

Have changes been made since the initial installation and configuration of theXerox 4500 PS TR ?

If you suspect that changes have been made to LAN, PSF/2 or PSF/AIX or the bootp server since the initial installation and con figuration of the Xerox 4500 PS TR, contact your system administrator.

∙Check that the configuration of the bootp server complies with the requirements.

150