Xerox D60327 instruction manual Broadcasting

Configuration

Xerox 4500 PS TR

PCL/SCS	(Mainframe)	170/SCS	(Mainframe)
PCL/DCA	(AS/400)
3270 /SCS	(Mainframe)
XES/DCA	(AS/400)
XES/SCS	(Mainframe)
150/SCS	(AS/400)

4.Highlight the driver you wish to use and click “ Open”.

5.Now the Monitor Form screen with the attached devices will appear. In this menu, you highlight the device to where you wish to download the PrintServer driver.

6.When selected, click “ OK” and the firmware is downloaded to the device.

3.3.9Broadcasting

One of the strong features of PSinst32 is the ability to detect and configure devices via the LAN. When the DLC port has been selected as download port, it is possible to detect devices even before an IP address has been associated. This kind of detection is called broadcasting. A broadcast message is issued through all bridges on the LAN. All associated devices will be able to recognize this message, and will return an identification message. The monitor sheet displays all devices which respond to the broadcast message.

NOTE:

Since broadcasting puts a heavy burden on the network, it should be limited to a minimum.

If you only need to update the status of the devices attached to the LAN, you are recommended to use the “Refresh” command instead of the “Discover” to lower network burden.

47