Xerox D60327 instruction manual General on Configuration, Psinst32, Bootp Server

Configuration

Xerox 4500 PS TR

3.1.1 Which Configuration Tool Do I Choose to Configure My PrintServer?

When delivered, the product has a MAC address but no IP address.

NOTE:

If the PrintServer is to be used for TCP/IP print, you need to define an IP address in the PrintServer. If you wish to configure via the Web browser or using Telnet, you need to define an IP address in the PrintServer as well. You do this in Psinst32 or via BOOTP.

About the IP Address

The IP address is unique in the Internet environment and consists of a network ID and a host ID.

3.1.1.1 Psinst32

See section 3.3 for details

3.1.1.2 BOOTP Server

BOOTP may also send config files as well as download firmware. See section 3.7 for details.

3.1.2 In General on Configuration...

The PrintServer can be subject to advanced configuration in general. This can be done in a number of ways which will be dealt with later in this document. The various configuration methods are:

⇒configuration via PSinst32

⇒configuration using Web browser

⇒configuration via Telnet

⇒configuration using a configuration file

⇒configuration using BOOTP server

27