Xerox D60327 instruction manual Save Configuration, Restore Configuration, Restore Factory Default

Configuration

Xerox 4500 PS TR

NOTE:

Only the password for the current session can be changed. If an invalid password is entered, the previous menu level is displayed.

3.5.6 Save Configuration

NOTE: When you have made new settings or changed existing, you must save the settings with this menu. Then reboot the printserver (see section “Reboot PrintServer below). If you fail to do this the new/modified settings will be lost when the printer is turned off.

In the sub-menu for the “Configure PrintServer” select “Save Configuration” by typing C at the selection prompts. You will see the following screen:

<PrintServer> SaveSettings 0xx.xxx

Saving current settings will overwrite default settings.

Enter “YES” to Save or “NO” to return without saving.

Save current Settings to Flash?

3.5.7 Restore Configuration

In the sub-menu for the “Configure PrintServer” select “Restore Configuration” by typing D at the selection prompts. Follow the instructions on the screen.

3.5.8 Restore Factory Default

In the sub-menu for the “Configure PrintServer” select “Restore Factory Default” by typing E at the selection prompts. Follow the instructions on the screen.

64