Xerox D60327 NetBEUI/NetBIOS Printing Using Windows ‘95, NT or OS/2, Windows ‘95 and NT Setup

NetBEUI/NetBIOS Printing

Xerox 4500 PS TR

5.NetBEUI/NetBIOS Printing Using Windows ‘95, NT or OS/2

This chapter provides instructions for setting up the Windows ‘95, NT or OS/2 operating systems for native printing via the Xerox 4500 PS TR using the NetBEUI/NetBIOS protocols.

Before you begin the setup procedure, please ensure that the NetBEUI/NetBIOS protocols have been properly installed on your network.

5.1 Windows ‘95 and NT Setup

Last 6 digets of

MAC address

To set up the Windows ‘95 and NT systems follow the below instructions:

Via the “Network Neighborhood” icon on your desktop, you select the “entire network” entry. Now open the default “Workgroup”.

The default name of the PrintServer will appear in the workgroup like this:

Now doubleclick the name of the PrintServer for configuration of the printers available in the PrintServer:

Only appears if PAR2 has been set to output

Again you doubleclick this entry to enter the printer selection mode. You will encounter the following query to which you answer “yes”:

96