Xerox DocuPrint 180 manual Clearance requirements, Environmental requirements

XEROX DOCUPRINT 180 LPS OVERVIEW

Clearance requirements

Table 1-2 describes the amount of clearance required for the various components.

Table 1-2.Clearance requirements

Component	Clearance required
Printer	36 inches/914 mm on each side
	50 inches/1270 mm at front of printer
System controller	36 inches/914 mm on each side
Finishers and bulk	36 inches/914 mm on each side
feeders(attached to your
bypass transport)

Environmental requirements

Table 1-3 lists the environmental requirements.

Table 1-3.DocuPrint 180 environmental requirements

Environmental requirements

Operating temperature	Recommended:	72° F ± 4° F / 22° C ± 2° C
	Minimum:	50° F / 10° C
	Maximum:	85° F / 29° C
Humidity	Minimum:	30%
	Maximum:	65%
	Recommended:	45% +/- 10%
Altitude	Normal:	Up to 6,000 feet/1830 m above sea level
	Maximum:	9,000 feet/2743 m above sea level
Heat dissipation
System controller	3,754 Btu per hour
Peripheral cabinet (fully configured)	3,195 Btu per hour
Printer	Standby:	4,454 Btu per hour
	Operating:	32,770 Btu per hour
	Energy Saver:	2,700 Btu per hour
Audible noise	Standby:	Continuous: 52dB (A)
		Impulse: N/A
	Operating:	Continuous: 82dB (A)
		Impulse: 82dB (A)

1-8 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE