XEROX DOCUPRINT 180 LPS OVERVIEW

Options

The following options are available to further enhance the capabilities of your Xerox DocuPrint 180 LPS.

Note: For detailed information regarding these options, please contact your sales representative.

Floppy disk drive

The floppy disk drive is located in the system controller, to the right of the 1/4 inch cartridge tape drive. It allows you to transfer files between a floppy disk and the system controller’s hard disk. Therefore, it provides an alternative way for backing up and restoring system controller rigid disk files.

9-track magnetic tape drive

The 9-track (1600/6250) magnetic tape drive is an alternative or additional offline capability to the 18 or 36-track cartridge tape drive for inputting print and nonprint data to the Xerox DocuPrint 180 LPS. (Refer to figure 3-5.)

Refer to Xerox DocuPrint 180 LPS Operator Guide and to the Xerox

LPS Tape Formats Manual for additional information

36-track cartridge tape drive

The 36-track cartridge tape drive is an alternative or additional offline capability to the 9-track magnetic tape drive for inputting print and nonprint data to the Xerox DocuPrint 180 LPS. It reads 18 and 36- track and writes 36-track IBM- and ANSI-compatible half-inch tape in the 36-track IBM 3480/3490 data format.

Refer to the Xerox DocuPrint 180 LPS Operator Guide and to the

Xerox LPS Tape Formats Manual for additional information.

Feeder stacker

The DocuPrint 180 LPS has an Inverter Feeder Stacker, and up to three optional feeder stackers.

Refer to the section “Printer components” in the “DocuPrint 180 LPS overview” chapter for information on the feeder stackers.

1-4

XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE

Page 18
Image 18
Xerox DocuPrint 180 Options, Floppy disk drive, Track magnetic tape drive, Track cartridge tape drive, Feeder stacker