Xerox manual DocuPrint 180 LPS production process overview, Output subsystem

BASIC CONCEPTS

Output subsystem

The output subsystem provides paper stacking, report collating, and sample print capabilities.

DocuPrint 180 LPS production process overview

The process of producing a job on an DocuPrint 180 LPS can be broken down into three distinct phases: input, special processing, and output. Figure

2-2, illustrates these three phases below.

Figure 2-2.Basic processing flow

A description of each phase is described in the input section that follows.

Sources of input for the DocuPrint 180 LPS

The input phase of job production begins with the collecting and inputting of data using one of the following sources:

Several data input methods are available, as shown in figure 2-3

2-4 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE