Xerox DocuPrint 180 manual Paper size, Portrait orientation shift and skew 8.5- by 11- inches

PRODUCT DIFFERENCES/USER CONSIDERATIONS

Figure 5-4 illustrates the portrait orientation shift and skew.

Figure 5-4.Portrait orientation shift and skew (8.5- by 11- inches)

Paper size

The following sections describe paper sizes.

Variable paper size Page dimensions up to the physical capacity of the feeder trays may be selected. (The largest feeder tray physical capacity is 14 by 17 inch; the smallest is 7 by 10 inch with the optional Paper Feeding Enhancement Kit installed). At system generation (sysgen), you can select USLETTER, USLEGAL, or A4; or you can select “other” and specify any paper size between the smallest and largest allowed (x by y) in millimeters. 11- by 17-inch/297- by 432-mm jobs are not supported, however, your Xerox DocuPrint 180 LPS handles 11- by 17-inch/297- by 432-mm IMG jobs.

The use of the PAPERSIZE command in PDL and the PAPER command in FDL permits form compilation and job printing on a size of paper other than the sysgened paper size and allows the specification of nonstandard paper sizes for those jobs requiring nonstandard paper

It is recommended that you sysgen to the largest size paper that you commonly use. Smaller and less-used paper sizes should be specified using PDL and FDL commands.

Refer to Xerox DocuPrint 180 LPS PDL Reference and Xerox DocuPrint 180 LPS Forms Creation Guide for more information on commands.

5-22 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE