XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
Appearing in the message area are the following messages:
•Lines 1 and 2. These lines display the current status of the printer, for example, READY.
•Line 3. This line displays messages concerning masked conditions, such as low dry ink. These messages are preceded by an asterisk.
•Line 4. This line displays messages concerning masked conditions, such as low dry ink. These messages are preceded by an asterisk.
The miscellaneous icons that appear in area 12 are as follows:
Hint icon This icon appears when a masked fault or condition exists in the printer. (Refer to the Xerox DocuPrint 180 LPS Operator Guide, “Fault masking and the printer control console” section.) The icon also appears on the PC UI.
Fault icon This icon appears only when a fault exists in the system that stops the printer or prevents it from printing. The icon also appears on the PC UI.
Guarded tools icon. This icon appears when a maintenance task requiring a Customer Productivity Workshop (CPW) trained operator must be done. If you have successfully completed CPW, either check the PC UI for messages concerning the maintenance task or touch the Guarded Tools icon to display the Guarded Tools screen. If you are not a CPW trained operator, notify your lead operator or a CPW trained operator at your site.
Note: The bypass transport is optional and appears on the printer control console of those systems that are configured as such.
Attention light
An attention light is mounted on top of the inverter module. (Refer to figure
Off No printer problems exist that require your attention.
Steady light A situation exists that needs your attention (such as a low dry ink condition).
Flashing The printer has stopped and your attention is required immediately.
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE |
