PRODUCT DIFFERENCES/USER CONSIDERATIONS
Table
Job features from 4650 |
|
(V3.5) | Results when run on DP 180 LPS) |
|
|
Clusters | Job prints. Operator needs to redefine |
| clusters if tray differs. |
|
|
Edgemarking | Job prints. |
|
|
Fonts | Job prints if the fonts and character sets |
| used are loaded on the DocuPrint 180 |
| LPS or if |
| are defined. |
|
|
Graphics | Job prints if sufficient graphic memory is |
| available and input source is 300 dpi |
| resolution. |
|
|
Labels | Job prints using only |
| Refer to the Xerox DP 180 LPS Operator |
| Guide for loading instructions. |
|
|
Page density | Job prints. |
|
|
Paper sizes | Job prints. |
|
|
Paper stock | Job prints if it does not use edge |
| reinforced |
|
|
Stitch commands | No stitcher available on DP 180 LPS, |
| therefore stitch commands are ignored |
| and job prints unstitched. |
|
|
600 dpi input | Job prints in 300 dpi. The 4650 LPS is |
| the only Xerox LPS that accepts 600 dpi |
| input. |
|
|
300 dpi with interpolated | Job prints. |
600 dpi output |
|
|
|
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE |
