PRODUCT DIFFERENCES/USER CONSIDERATIONS
Table
DocuPrint 180 LPS
Job features from 4050/ |
|
4090 (V3.5) | Results when run on DP 180 LPS |
|
|
Programmable bypass | Job prints if DP 180 LPS has a bypass |
transport | transport and the finishing device is |
| required by the job. Otherwise, it does |
| not run. |
|
|
Clusters | Job prints. Operator needs to redefine |
| clusters if trays differ. |
|
|
Edgemarking | Job prints |
|
|
Fonts | Job prints if the fonts and character sets |
| used are loaded on the DocuPrint 180 |
| LPS or if |
| are defined. |
|
|
Graphics | Job prints if sufficient graphic memory is |
| available. |
|
|
Labels | Job prints using only paper labels. Refer |
| to the Xerox DP 180 LPS Operator |
| Guide for loading instructions. |
|
|
Page density | Job prints. |
|
|
Paper sizes | Job prints. |
|
|
Paper stock | Job prints if it does not use edge |
| reinforced |
|
|
Stitch commands | No stitcher available on DP 180 LPS, |
| therefore stitch commands are ignored |
| and job prints unstitched. |
|
|
Transparencies | Job prints. |
|
|
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE |
