Yamaha 01V96i Surround Panning

56 Surround Pan

01V96i—Reference Manual

Surround Panning

You can set the surround pan parameters for each Input

Channel.

1. Make sure that the 01V96i is in any Surround

mode except Stereo, then press the [SEL] but-

ton of the channel for which you want to set

surround pan.

2. Press the DISPLAY ACCESS [PAN/ROUTING]

button repeatedly until the Pan/Route | Ch

Edit page appears.

The Ch Edit page displays the selected Input Channel,

and its surround pan setting and available pair partner.

The following display page is an example in 6.1 Surround

mode.

The following parameters are available on this page:

1Surround pan graph

This graph indicates the pan positions in a two-dimen-

sional field, with the listening position in the center. A

small diamond ( ) indicates the current surround pan

position. You can move the current surround pan posi-

tion ( ) directly to one of the speaker icons by select-

ing its icon, then pressing [ENTER].

2Trajectory patterns

These buttons represent seven trajectory patterns that

determine how the surround pan moves when you oper-

ate the Parameter wheel or the [INC]/[DEC] buttons.

3FAST

Turning on this button increases the speed of sound

images panned via the Parameter wheel.

4Trajectory pattern parameters

These parameters fine-tune the surround pan trajectory

pattern.

•WIDTH ............This parameter sets the left-to-right

width of the selected trajectory pat-

tern.

•DEPTH ............. This parameter sets the front-to-rear

width of the selected trajectory pat-

tern.

•OFFSET ............This parameter offsets the

left-to-right direction of the selected

trajectory pattern.

•OFFSET ............This parameter offsets the

front-to-rear direction of the

selected trajectory pattern.

5LFE

This parameter control sets the level of the LFE (Low Fre-

quency Effects) Channel signal routed to the subwoofer,

and appears only in 5.1 and 6.1 Surround modes.

6F/R

In 6.1 Surround mode, F and R parameter controls

appear. The F parameter control determines how the

Front Center signal is fed to the Left and Right channels,

and the R parameter control determines how the rear sur-

round signal is fed to the Left and Right surround chan-

nels.

6DIV

This parameter control, instead of the F/R parameter

control, appears in 3-1 or 5.1 Surround mode, and deter-

mines how the Center signal is fed to the Left, Right, and

Center channels. It is expressed as a percentage ranging

from 0 to 100%. When you set the parameter to 100, the

Center signal is fed to only the Center channel. When you

set the parameter to 0, the Center signal is fed to only the

Left and Right channels. When you set the parameter to

50, the Center signal is fed equally to the Left, Right, and

Center channels.

7LINK

This button is available only in 6.1 Surround mode. When

you turn on this button, the F and R controls are set to the

same value, and linked together.

8ST LINK

Turning on this button links the surround pan parame-

ters of two Input Channels that are currently displayed on

the page (Stereo Link function). You can link the sur-

round pan parameters of two channels regardless of

whether they are paired.

9PATTERN

When Input Channels are linked by the Stereo Link func-

tion, the seven patterns selectable here determine how the

linked surround pan moves via the Parameter wheel and

the [INC]/[DEC] buttons.