Yamaha 01V96i Libraries

74 Libraries

01V96i—Reference Manual

Libraries

This chapter describes the 01V96i’s various libraries.

About the Libraries

The 01V96i features seven libraries that enable you to store

Channel, Input Patch, Output Patch, Effects, and other data.

You can also quickly recall this data from the libraries to

restore previous parameter values.

The 01V96i offers the following libraries:

• Channel Library

•Input Patch Library

• Output Patch Library

•Effects Library

•Gate Library

•Compressor Library

•EQ Library

General Library Operation

Most library functions are the same for each librar y.

1. Use the buttons on the top panel to locate the

desired library pages.

The procedure for locating library pages varies depend-

ing on the library. Refer to the latter part of this chapter

for more information on how to display the desired

library page.

The example below assumes you have located the Input

Patch library p age.

The library memory title list is displayed in the middle of

the page. The message “No Data!” appears in the title col-

umn of empty library memories.

An “ ” icon is displayed next to the name of read-only

preset memories. You cannot store, clear, or edit the titles

of these memories.

Memories #0 and #U are special read-only memories.

Recall memory #0 to reset the parameter settings to their

initial values. Recall #U to undo memory recall and store

operations.

2. Rotate the Parameter wheel or press the

[INC]/[DEC] buttons to select the desired

memory.

The selected memory appears inside the dotted box.

3. Move the cursor to one of the following func-

tion buttons, then press [ENTER].

1TITLE EDIT

This button displays the Title Edit window, which enables

you to edit the title of the selected memory. Move the cur-

sor to the OK button, then press [ENTER] to confirm the

edited title. Refer to “Title Edit Window” in the Owner’s

Manual (booklet) for more information on entering char-

acters.

2RECALL

This button recalls the contents of the selected library

memory. If you turn on the Recall Conf irmation param-

eter on the DIO/Setup | Prefer1 page, the 01V96i displays

a memory recall confirmation window.

3STORE

This button stores the settings to the selected memory.

Before you store the settings, you can enter or edit the title

using the Title Edit window.

You can disable the Title Edit window by turning off the

Store Confirmation parameter on the DIO/Setup |

Prefer1 page. If you bypass the Edit Title window, the

name “New Data” will be used as a title for the Scene

memory.

4CLEAR

This button deletes the contents of the selected memory.

After you press [ENTER], the 01V96i displays a confir-

mation window. To execute the delete operation, move

the cursor to the YES button in the confirmation window,

then press [ENTER].

Tip:

•You can store library data to a computer hard disk using the

included Studio Manager software. Be sure to back up your

important data.

•You can also store library data to an external MIDI device,

such as a MIDI data filer, by using MIDI Bulk Dump (see

page107).

Note: If you select a memory that already contains settings

and execute the delete operation, the settings will be lost.

Make sure that you do not accidentally delete important set-

tings.