Yamaha 01V96i Fading Scenes

Fading Scenes 71

01V96i—Reference Manual

Scene Memories

Fading Scenes

You can specify the time it takes the Input and Output Chan-

nel faders (or level controls) to move to their new positions

when a Scene is recalled. This is called Fade Time, and it can

be set for each channel in the range of 00.0 through 30.0 sec-

onds (in 0.1 second steps). You can set the Fade Time for each

Scene individually or for all Scenes globally.

Fading Input Channels

To set the Fade Time for Input Channels 1–32 and ST IN

Channels 1–4, press the DISPLAY ACCESS [SCENE] button

repeatedly until the Scene | In Fade page appears. Move the

cursor to the desired channel parameter box, then rotate the

Parameter wheel or press the [INC]/[DEC] buttons to modify

the Fade Time setting.

1Global Fade Time

When this check box is checked, a Scene is recalled using

the currently-specified Fade Time. (The Fade Time set-

ting stored in the recalled Scene is temporarily ignored.)

This check box setting works in unison with the Out Fade

page.

2ALL INPUT CLEAR

This button resets all channel Fade Times on the page to

00.0 second.

3INPUT CH1–32/ST IN 1–4

These parameters enable you to set the Fade Time for

each Input Channel in the range of 00.0 through 30.0 sec-

onds. The Fade Time setting for one channel in a pair

works in unison with its partner.

Fading Output Channels

To set the Fade Time for the Output Channels (Stereo Out,

Bus Outs 1–8, Aux Outs 1–8), press the DISPLAY ACCESS

[SCENE] button repeatedly until the Scene | Out Fade page

appears.

The basic operation is the same as on the In Fade page.

1BUS1–8

These parameters enable you to set the Fade Time for

each Bus Out (1–8) in the range of 00.0 through 30.0 sec-

onds.

2AUX1–8

These parameters enable you to set the Fade Time for Aux

Outs 1–8.

3STEREO

This parameter enables you to set the Fade Time for the

Stereo Out.

4INPUT MASTER A–H

These parameters enable you to set the Fade Time for

Input Fader Group Master A–H.

5OUTPUT MASTER Q–T

These parameters enable you to set the Fade Time for

Output Fader Group Master Q–T.

Tip:

•If you operate a fader while fading channels, the fader’s Fade

Time setting is temporarily ignored.

•You can copy the currently-selected Input Channel Fade Time

to all Input Channels by double-clicking the [ENTER] button

to display a window for c opying. This i s convenient whe n you

wish to set the Fade Time for all channels simultaneously.

1 23

Tip: You can copy the currently-selected Output Channel Fade

Time setting to all Output Channels by double-clicking the

[ENTER] button.