❑Subwoofer Trim (SW.Trim)Fine-adjusts the subwoofer volume.

Setting range

-6.0 dB to +6.0 dB (0.5 dB increments)

Default

0.0 dB

■Video Mode (Video Mode)

Enables/disables the video signal processing (resolution, aspect ratio and video adjustments) settings configured in “Processing” (p.119) in the “Setup” menu.

Settings

Processing

Enables the video signal processing.

(Processing)

Direct (Direct)

■ Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer and the high-resolution mode.

(default)

Disables the video signal processing.

❑Enhancer (Enhancer)Enables/disables Compressed Music Enhancer (p.68).

•This setting is applied separately to each input source.

•You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.68).

Settings

Off (Off)

Disables Compressed Music Enhancer.

 

 

On (On)

Enables Compressed Music Enhancer.

 

 

Default

TUNER, USB, (network sources): On (On)

Others: Off (Off)

■Video Adjustment (Video Adjust)

Selects a video adjustment setting from presets you have configured in “Adjustment” (p.120) in the “Setup” menu.

• This setting is applied separately to each input source.

Settings

1 to 6

■Audio Select (Audio Select)

Selects the audio input jack to use when more than one audio connection is made for one input source.

•This setting is applied separately to each input source.

Settings

• Compressed Music Enhancer does not work on signals whose sampling rate is over 48 kHz.

❑Hi-Res Mode (HiRes Mode)

Auto (Auto) (default)

Automatically selects the audio input jack in the following priority order. 1. HDMI input

2. Digital input (COAXIAL or OPTICAL)

Enables/disables the high-resolution mode when “Enhancer” is set to “On”. If this function is set to “On”, you can enhance the quality of uncompressed digital audio (such as 2-channel PCM and FLAC) using Compressed Music Enhancer.

HDMI (HDMI)

3. Analog input (AUDIO)

Always selects HDMI input. No sounds are produced when no signals are input through the HDMI jack.

Settings

Coax/Opt

Always selects digital input (COAXIAL or OPTICAL). No sounds are produced when no signals are input through the COAXIAL or

Off (Off)

Disables the high-resolution mode.

(Coax/Opt)

OPTICAL jack.

On (On) (default)

Enables the high-resolution mode.

Analog (Analog)

Always selects analog input (AUDIO). No sounds are produced when no signals are input through the AUDIO jacks.

PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)

En 101