Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■RX-A3020, ■RX-A2020, Multi-zoneoutput, Audio output, Video output, ❑Audio output, ❑Video output, ❑Audio output, ❑Video output, Out, Out, Out, Out, jacks

Multi-zone output

■RX-A3020❑Audio output

	Using the unit's		Using an external amplifier (p.91)
	internal amplifier (p.32)
Out	EXTRA SP 1–2 jacks		ZONE OUT/PRE OUT		HDMI OUT 2
			jacks		(ZONE OUT) jack
In	Zone2	Zone3	Zone2	Zone3	Zone2 (*1)	Zone4 (*2)
Digital audio (HDMI)	m(*3)		m(*3)		m(*3)	m(*4)
Digital audio	m(*5)		m(*5)		m(*5)
(COAXIAL/OPTICAL)
Analog audio	m	m	m	m	m
(AUDIO)
USB (including iPod)	m	m	m	m	m
Network sources	m	m	m	m	m
TUNER	m	m	m	m	m

m: Available

*1 Available when “HDMI OUT2 Assign” (p.127) in the “Setup” menu is set to “Zone2” (Audio Output: On)

*2 Available when “HDMI OUT2 Assign” (p.127) in the “Setup” menu is set to “Zone4”

*3 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels] when the input source selected in the main zone is selected)

*4 HDMI audio pass-through (stereo output [down mixed to 2-channels] when the input source selected in the main zone is selected)

*5 Available when 2-channel PCM signals are input

❑Video outputMONITOR OUT/ZONE OUT jacks (*6)

				HDMI OUT 2 (ZONE OUT)
Out	COMPONENT	S VIDEO	VIDEO		jack (*7)
	VIDEO
In
	Zone2/3	Zone2/3	Zone2/3	Zone2		Zone4
HDMI video				m		m
Component video	m
S-video		m
Composite video			m
On-screen display	m(*8)	m(*8)	m(*8)	m
(browse/playback)
						m: Available

*6 Available when “Monitor Out Assign” (p.126) in the “Setup” menu is set to “Zone2” or “Zone3”

*7 Available when “HDMI OUT2 Assign” (p.127) in the “Setup” menu is set to “Zone2” or “Zone4”

*8 Not available in Zone3 when “HDMI OUT2 Assign” (p.127) in the “Setup” menu is set to “Zone2”

■RX-A2020

❑Audio output

	Using the unit's internal amplifier			Using an external amplifier
		(p.32)			(p.91)
Out	EXTRA SP 1–2				ZONE OUT
		jacks			jacks
In	Zone2		Zone3	Zone2		Zone3
Digital audio (HDMI)
Digital audio
(COAXIAL/OPTICAL)
Analog audio	m		m	m		m
(AUDIO)
USB (including iPod)	m		m	m		m
Network sources	m		m	m		m
TUNER	m		m	m		m

m: Available

*To listen to the playback of an external device in Zone2 or Zone3, connect the device to the AUDIO jacks of the unit with a stereo pin cable.

❑Video output

Out		MONITOR OUT/ZONE OUT jacks
	COMPONENT		S VIDEO	VIDEO
	VIDEO
In
	Zone2/3		Zone2/3	Zone2/3
HDMI video
Component video	m
S-video			m
Composite video				m
On-screen display	m		m	m
(browse/playback)
				m: Available

*To watch videos in Zone2 or Zone3, set “Monitor Out Assign” (p.126) in the “Setup” menu is set to “Zone2” or “Zone3”.

APPENDIX ➤ Glossary En 157