Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■Configuration, ❑Front, ❑Center, ❑Surround, ❑Surround Back, Selects the size of the front speakers, Configures the output characteristics of the speakers

	(RX-A3020 only)
7ch BI-AMP +FP	Select this when you use 7-channel speakers (including bi-amp front
	speakers) plus front presence channel expansion using an external
	amplifier (p.26).

(RX-A3020 only)

7ch BI-AMP +FP+RP Select this when you use 7-channel speakers (including bi-amp front speakers), plus front presence and rear presence channel expansion

using an external amplifier (p.27).

■ConfigurationConfigures the output characteristics of the speakers.

•When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑FrontSelects the size of the front speakers.

Settings

	Select this option for large speakers.
Large	The front speakers will produce all of the front channel frequency
	components.
	Select this option for small speakers.
Small (default)	The subwoofer will produce front channel low-frequency components
	lower than the specified crossover frequency (default: 80 Hz).

• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.

❑CenterSelects whether or not a center speaker is connected and its size.

Settings

	Select this option for large speakers.
Large	The center speaker will produce all of the center channel frequency
	components.
	Select this option for small speakers.
Small (default)	The subwoofer or front speakers will produce center channel
	low-frequency components lower than the specified crossover
	frequency (default: 80 Hz).
None	Select this option when no center speaker is connected.
	The front speakers will produce center channel audio.

❑SurroundSelects whether or not surround speakers are connected and their sizes.

Settings

	Select this option for large speakers.
Large	The surround speakers will produce all of the surround channel
	frequency components.
	Select this option for small speakers.
Small (default)	The subwoofer or front speakers will produce surround channel
	low-frequency components lower than the specified crossover
	frequency (default: 80 Hz).
	Select this option when no surround speakers are connected.
None	The front speakers will produce surround channel audio. Virtual
	CINEMA DSP works when you select a sound program.

❑Surround BackSelects whether or not surround back speakers are connected and their sizes.

Settings

	Select this option when one large speaker is connected.
Large x1	The surround back speaker will produce all of the surround back
	channel frequency components.
	Select this option when two large speakers are connected.
Large x2	The surround back speakers will produce all of the surround back
	channel frequency components.
	Select this option when one small speaker is connected.
Small x1	The subwoofer or front speakers will produce surround back channel
	low-frequency components lower than the specified crossover
	frequency (default: 80 Hz).
	Select this option when two small speakers are connected.
Small x2 (default)	The subwoofer or front speakers will produce surround back channel
	low-frequency components lower than the specified crossover
	frequency (default: 80 Hz).
None	Select this option when no surround back speakers are connected.
	The surround speakers will produce surround back channel audio.

• This setting is not available when “Surround” is set to “None”.

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 115