Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 Setup menu items, Menu, Item, Page, Front, Level, Sound, Video, Center, Speaker, Lipsync, Function, Surround, Distance, Subwoofer, Subwoofer, Test Tone

Setup menu items

Menu	Item			Function	Page
	Auto Setup			Automatically optimizes the speaker settings (YPAO).	50
		Setting Pattern		Registers two speaker setting patterns and switches between them.	114
		Setting Data Copy		Copies the “Setting Pattern” parameters in the specified direction.	114
		Power Amp Assign		Selects a speaker system.	114
			Front	Selects the size of the front speakers.	115
			Center	Selects whether or not a center speaker is connected and its size.	115
			Surround	Selects whether or not surround speakers are connected and their size.	115
			Surround Back	Selects whether or not surround back speakers are connected and their size.	115
Speaker		Configuration	Front Presence	Selects whether or not front presence speakers are connected.	116
	Manual Setup
			Rear Presence	Selects whether or not rear presence speakers are connected.	116
			Subwoofer 1	Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase.	116
			Subwoofer 2
			SWFR Layout	Selects a subwoofer layout when 2 subwoofers are used.	116
			Extra Bass	Sets the speakers to produce the front channel low-frequency components.	116
		Distance		Sets the distance between each speaker and listening position.	116
		Level		Adjusts the volume of each speaker.	117
		Parametric EQ		Adjusts the tone with an equalizer.	117
		Test Tone		Enables/disables the test tone output.	117
		Delay Enable		Enables/disables the Lipsync adjustment for each input source.	118
	Lipsync	Auto/Manual Select		Selects the method to adjust the delay between video and audio output.	118
		Adjustment		Adjusts the delay between video and audio output manually.	118
Sound	Dynamic Range			Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.	118
	Max Volume			Sets the maximum volume to prevent excessive loudness.	118
	Initial Volume			Sets the initial volume for when this receiver is turned on.	119
	Pure Direct Mode			Selects whether to output video signals during the Pure Direct mode.	119
	Adaptive DSP Level			Selects whether to automatically adjust the CINEMA DSP effect level.	119
Video	Analog to Analog Conversion			Enables/disables the video conversion between the analog video jacks	119
	Video Mode			Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).	119

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 112