Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■Network Name, ■Network Standby, ■MAC Address Filter, ❑Filter, Procedure, ■Procedure, ■Procedure, ❑MAC Address 1–10, Enables/disables the MAC address filter

6To save the changes, use the cursor keys to select “OK” and press ENTER.7To exit from the menu, press ON SCREEN.■Network Standby

Selects whether the unit can be turned on from other network devices (network standby).

Settings

Off (default) Disables the network standby function.

■Network Name

Edits the network name (the unit’s name on the network) displayed on other network devices.

■Procedure1Press ENTER to enter the name edit screen.

2Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.

On

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

■MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

❑FilterEnables/disables the MAC address filter.

Settings

Off (default) Disables the MAC address filter.

Enables the MAC address filter. In “MAC Address 1–10”, specify the

OnMAC addresses of the network devices that will be permitted access to the unit.

❑MAC Address 1–10

Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”.

■Procedure

1 Use the cursor keys (q/w) to select “MAC Address 1–5” or “MAC Address 6–10” and press ENTER.

2Use the cursor keys (q/w) to select an MAC address number and press ENTER.

3Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

4To confirm the setting, press ENTER.

5To save the changes, use the cursor keys to select “OK” and press ENTER.

6To exit from the menu, press ON SCREEN.

• To clear the entry, select “CLEAR”.

3Use the cursor keys to select “OK” and press ENTER.

• To restore the default setting, select “RESET”.

4To exit from the menu, press ON SCREEN.

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 124