Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■Display Set, ■Trigger Output1, Trigger Output2, Source, Manual, ❑Wall Paper, ❑Trigger Mode, ❑Short Message, ❑Dimmer (Front Display)

3To exit from the menu, press ON SCREEN.

•You cannot assign both COAXIAL and OPTICAL jacks to the same input source.

■Display Set

■Trigger Output1, Trigger Output2

Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching.

❑Trigger ModeSpecifies the condition for the TRIGGER OUT jack to function.

Configures the settings related to the front display and TV screen display.❑Dimmer (Front Display)Adjusts the brightness of the front display.

Settings

Power (default)

The TRIGGER OUT jack functions in sync with the power status of the zone specified with “Target Zone”.

Setting range

-4 to 0 (higher to brighten)

Default

Source

The TRIGGER OUT jack functions in sync with the input switching in the zone specified with “Target Zone”.

An electronic signal is transmitted according to the setting made in “Source”.

• The front display may become dark when “ECO Mode” (p.130) is set to “On”.

Manual

Source

Select this to manually switch the output level for electronic signal transmission with “Manual”.

❑Short Message

Selects whether to display short messages on the TV screen when the unit is operated (such as input selection and volume adjustment).

Settings

Specifies the output level of the electronic signal transmitted with each input, switching when “Trigger Mode” is set to “Source”.

Choices

AV 1–7, V-AUX, AUDIO 1–4, PHONO, TUNER, (network sources), USB, MULTI CH

Settings

On (default)	Displays short messages on the TV screen.
Off	Does not display short messages on the TV screen.

Low

Stops the electronic signal transmission when you switch to the input source specified in this option.

❑Wall PaperSelects the image to be used as wallpaper on the TV.

High (default)

Manual

Transmits the electronic signal when you switch to the input source specified in this option.

Settings

	Picture 1 (default),	Displays the selected image on the TV screen when there is no video
	Picture 2, Picture 3	signal.

	Gray	Displays a gray background on the TV screen when there is no video
	Gray	signal.
		signal.

Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can also be used to confirm proper function of the external device connected via the TRIGGER OUT jack.

Choices

Low	Stops the electronic signal transmission.
High (default)	Transmits the electronic signal.

CONFIGURATIONS ➤ Configuring various functions (Setup menu)	En 128