Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 (MONITOR CHECK), (TUNER FRQ STEP), Changing the FM/AM tuning frequency setting, Switching the video signal type (TV FORMAT), region,   T V  F O R M A T

5Press ENTER to confirm the setting.

Once the remote control ID is registered successfully, “OK” appears in the display window.

If “ERROR” appears, registration failed. Repeat from step 3.6To exit from the setup menu, press SETUP.

•The registered remote control codes (p.136) are not cleared even if you change the remote control ID.

Changing the FM/AM tuning frequency setting(TUNER FRQ STEP)

Removing the limitation on HDMI video output(MONITOR CHECK)

DOCK	SPIMP.-	M O N I T O R  C H E C K
TAG
HD			MUTE VOLUME
STEREO TUNED PRE AMP PARTY
	ZONE ZONE ZONE	           Y E S	ADAPTIVE DRC
IN OUT 1 OUT 2 2 3 4			PL L C R PR
ENHANCER SLEEP			SL SW1 SW SW2 SR
	HD 3		PL SBL SB SBR PR

The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack.

Disable the monitor check function if you want to specify a resolution in “Resolution” (p.120) when the unit cannot detect the TV’s resolution or when you want to specify a different resolution than the detected resolution.

(Asia and General models only)

Settings

YES (default)

Enables the monitor check function. (Outputs video signals with a resolution supported by the TV only.)

DOCK	T U N E R  F R Q  S T E P
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE	      F M 5 0 / A M 9
IN OUT 1 OUT 2 2 3 4
SLEEP
HD 3

Change the FM/AM tuning frequency setting of the unit depending on your country or

SKIP

Disables the monitor check function. (Outputs video signals with a specified resolution regardless of compatibility with the TV.)

region.

Settings

FM100/AM10

Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps.

•Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV after “MONITOR CHECK” has been set to “SKIP”.

FM50/AM9 (default)

Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

DOCK	SPIMP.-	  T V  F O R M A T
TAG
HD			MUTE VOLUME
STEREO TUNED PRE AMP PARTY
	ZONE ZONE ZONE	          N T S C	ADAPTIVE DRC
IN OUT 1 OUT 2 2 3 4			PL L C R PR
ENHANCER SLEEP			SL SW1 SW SW2 SR
	HD 3		PL SBL SB SBR PR

Switch the video signal type of the unit so that it matches to the format of your TV.

Settings

NTSC, PAL

Default

U.S.A., Canada, Korea and General models: NTSC

Other models: PAL

CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu) En 134