Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■Level, ■Test Tone, ■Parametric EQ, aPress LEVEL, ■Manual equalizer adjustment, Adjusts the volume of each speaker, Adjusts the tone with an equalizer

■LevelAdjusts the volume of each speaker.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

Default

0.0 dB

Adjusting while viewing the front displayaPress LEVEL.bUse the cursor keys (q/w) to select a speaker.cUse the cursor keys (e/r) to adjust the volume of the selected speaker.■Parametric EQAdjusts the tone with an equalizer.

Settings

Manual	Select this option when you want to adjust the equalizer manually.
	For details, see “Manual equalizer adjustment”.
YPAO:Flat	Adjusts individual speakers to achieve the same characteristics.
YPAO:Front	Adjusts individual speakers to achieve the same characteristics as
	the front speakers.
YPAO:Natural	Adjusts all speakers to achieve a natural sound.
Through	Does not use the equalizer.

•“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto Setup” have already been saved (p.50). Press ENTER again to view the measurement results.

■Manual equalizer adjustment

•To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.

•To copy the parametric equalizer values acquired with “Auto Setup” (p.50) to the “Manual” fields for fine adjustment, select “PEQ Data Copy” and then an equalizer type.

4Use the cursor keys (e/r) to select a preset band and the cursor keys (q/w) to adjust the gain.

Setting range

Gain: -20.0 dB to +6.0 dB

5To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item.

Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain.

Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain.

Setting range

Center frequency: 31.3 Hz to 16.0 kHz (31.3 Hz to 250.0 Hz for subwoofer)

Q factor: 0.500 to 10.080

6To exit from the menu, press ON SCREEN.

■Test Tone

Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect.

Settings

Off (default) Does not output test tones.

1Set “Parametric EQ” to “Manual” and press ENTER.2Press ENTER again to enter the edit screen.3Use the cursor keys to select a speaker and press ENTER.

On

Outputs test tones automatically when you adjust the speaker balance or equalizer.

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 117