Speaker (Manual Setup)Configures the speaker settings manually.■Setting PatternRegisters two speaker setting patterns and switches between them.

When you configure the following speaker settings, the settings will be memorized in the selected pattern.

•Measurement results (Auto Setup)•Power Amp Assign•Configuration•Distance•Level•Parametric EQ

Settings

Pattern1 (default), Pattern2

•The setting pattern currently selected is shown at the top of the “Auto Setup” and “Manual Setup” screens.

•This function is useful when you want to save certain settings according to the varying conditions of your listening environment. For example, if you want to switch the settings when curtains are open or closed, you can save the settings suited for each condition and switch between them.

■Setting Data CopyCopies the “Setting Pattern” parameters in the specified direction.

Choices

Pattern1 > 2

Copies the “Pattern1” parameters to “Pattern2”.

Pattern2 > 1

Copies the “Pattern2” parameters to “Pattern1”.

 

 

■Power Amp AssignSelects a speaker system.The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to

2 subwoofers (with built-in amplifier) to create the favorite acoustic space in your room. You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system.

Settings

Basic (default)

Select this option when you use the basic speaker configuration (up to

9-channel plus rear presence speakers) (p.19).

 

 

 

 

Select this when you use 7-channel speakers in the main zone and

7ch +1ZONE

Zone2 (or Zone3) speakers (p.30).

You can select a zone to be assigned to the EXTRA SP 1 jacks

 

 

(default: Zone2).

 

 

 

Select this when you use 9-channel speakers in the main zone and

9ch +1ZONE

Zone3 (or Zone2) speakers (p.30).

You can select a zone to be assigned to the EXTRA SP 2 jacks

 

 

(default: Zone3).

 

 

 

Select this when you use 7-channel speakers in the main zone, plus

7ch +2ZONE

Zone2 and Zone3 speakers (p.31).

You can select a zone to be assigned to the EXTRA SP 1 jacks

 

 

(default: Zone2) and EXTRA SP 2 jacks (default: Zone3).

 

 

 

(RX-A3020 only)

9ch +RP

Select this when you use 9-channel speakers plus rear presence

 

channel expansion using an external amplifier (p.27).

 

 

 

(RX-A3020 only)

9ch +FRONT

Select this when you use 9-channel speakers plus front channel

 

expansion using an external amplifier (p.28).

 

 

 

(RX-A3020 only)

7ch +FP+RP

Select this when you use 7-channel speakers, plus front presence and

 

rear presence channel expansion using an external amplifier (p.28).

 

 

 

Select this when you use 7-channel speakers plus front channel

7ch

expansion using an external amplifier in the main zone and Zone3 (or

Zone2) speakers (p.29).

+FRONT+1ZONE

You can select a zone to be assigned to the EXTRA SP 2 jacks

 

 

(default: Zone3).

 

 

 

Select this when you use 5-channel speakers plus front channel

5ch

expansion using an external amplifier in the main zone, plus Zone2

and Zone3 speakers (p.29).

+FRONT+2ZONE

You can select a zone to be assigned to the EXTRA SP 1 jacks

 

 

(default: Zone2) and EXTRA SP 2 jacks (default: Zone3).

 

 

7ch BI-AMP

Select this when you use 7-channel speakers (including bi-amp front

speakers) (p.26).

 

 

 

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 114