❑Front PresenceSelects whether or not front presence speakers are connected.
❑SWFR LayoutSelects a subwoofer layout when 2 subwoofers are used.

Settings

Use (default)

Select this option when front presence speakers are connected.

None

Select this option when no front presence speakers are connected.

Settings

Left + Right

Select this option when 2 subwoofers are placed on the left and right sides of the room.

❑Rear Presence

Front + Rear

Monaural x2

Select this option when 2 subwoofers are placed on the front and rear sides of the room.

Selects whether or not rear presence speakers are connected.

Settings

(default)

Select this option when 2 subwoofers are placed freely.

Use

Select this option when rear presence speakers are connected.

None (default)

Select this option when no rear presence speakers are connected.

 

 

• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.

❑Extra BassSets the speakers to produce the front channel low-frequency components.

• This setting is not available when “Surround” or “Front Presence” is set to “None”.

❑Subwoofer 1, Subwoofer 2Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or

Settings

Off (default)

Depending on the size of the front speakers, either the subwoofer or front speakers produce the front channel low-frequency components.

SUBWOOFER 2 jack and its phase.

Settings

On

Both the front speakers and subwoofer produce the front channel low-frequency components.

 

 

Select this option when a subwoofer is connected to the

 

Normal

SUBWOOFER 1 or SUBWOOFER 2 jack (phase not reversed). The

 

(default)

subwoofer will produce LFE (low-frequency effect) channel audio and

Use

 

low-frequency components from other channels.

 

 

 

Select this option when a subwoofer is connected to the

 

 

 

Reverse

SUBWOOFER 1 or SUBWOOFER 2 jack (phase reversed). The

 

subwoofer will produce LFE (low-frequency effect) channel audio and

 

 

 

 

low-frequency components from other channels.

 

 

 

 

 

Select this option when no subwoofer is connected to the

 

 

SUBWOOFER 1 or SUBWOOFER 2 jack. The front speakers will

None

produce LFE (low-frequency effect) channel audio and low-frequency

 

 

components from other channels when both “Subwoofer 1” and

 

 

“Subwoofer 2” are set to “None”.

 

 

 

• When the bass sound is lacking or unclear, switch the subwoofer phase.

•This setting is not available when both “Subwoofer 1” and “Subwoofer 2” are set to “None”, or when “Front” is set to “Small”.

■Distance

Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

Default

3.00 m (10.0 ft)

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 116