Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 Editing device names, For TV:, 10 seconds, Press SETUP, 1Press SETUP, 4 Press ENTER, at each other, press RECEIVER, assign a function, For TV: press TV z

SOURCE RECEIVER

AV

1 2 3 4

5		6				7		V-AUX
				AUDIO
1		2				3	4
PHONO			MULTI			USB		NET
TUNER			[ A ]			[ B ]		[ C ]
				SCENE
1		2				3	4
	PROGRAM MUTE						VOLUME
	TOP MENU						POP-UP/MENU
ON SCREEN								OPTION
					ENTER
RETURN								DISPLAY
MODE
		CLASSICAL				LIVE		ENTERTAIN
						CLUB
PRESET
			MOVIE			STEREO		STRAIGHT
			TV					PURE
INPUT
								DIRECT
MUTE			TV VOL			TV CH

RECEIVER z	4 Press ENTER.
	5 Aim the infrared transmitters of the remote controls
	at each other.
Input selection keys					Remote control of external device
			TUNER
SCENE
	VOLUME PROGRAMMUTE	AUX-V 7 65 AUDIO 4 3 21 NET USB MULTIPHONO ] C [ ] B [ A][ SCENE 4 3 21		AV 4 3 21	RECEIVER SOURCE
External device
operation keys
Menu operation keys					5 to 10 cm (2 to 4”) apart
Cursor keys	6 Perform the following steps (a and b) within
ENTER
DISPLAYSPLAY
MODE	10 seconds.
External device	a On the unit, press one of the following keys to which you want to
operation keys
		assign a function.
		For playback device: SOURCE z, menu operations keys,
		DISPLAY, MODE, external device operation keys, numeric keys
TV operation keys		For TV: TV operation keys
TV z	b On the external device, press the key from which the operation is
		learned until “OK” appears in the display window.

If “NG” appears, learning has failed. Repeat from Step 4.

Note

•If you press RECEIVER zin Step 3, you can assign functions of an external receiver to the menu operation keys, external device operation keys or numeric keys. However, it makes these keys to control the unit impossible. If you need to restore the remote control code for the unit, perform the following steps.

a Press SETUP.

b Use the cursor keys (q/w) to select “CLEAR” and press ENTER. c Use the cursor keys (q/w) to select “LEARN” and press ENTER. d Press RECEIVER z.

e Hold down ENTER until “OK” appears on the window display. f To exit from the setup menu, press SETUP.

Editing device names

You can edit the device names or scene names displayed on the remote control’s display window.

1Press SETUP.

Perform each of the following steps within 30 seconds.

Otherwise, the setting will be canceled. If this happens, repeat from Step 1.2Use the cursor keys (q/w) to select “RENAME” and press ENTER.

RENAME

SUR.	ENHANCER	PARTY	HDMI OUT
DECODE
INFO	MEMORY	FM	AM

1	2	3
			TUN./ CH
4	5	6
				Numeric keys
7	8	9	SLEEP
10	0	ENT	LEVEL
				SETUP
		ZONE	SETUP

7Repeat Steps 3 to 6 until all desired operations are learned.8To exit from the setup menu, press SETUP.

•This remote control can learn approximately 200 functions (may be decreased depending on the signals). If “FULL” appears in the display window, clear unnecessary assignments to free some memory space for the new functions.

3Press one of the following keys to select a device or a scene.

For playback device: press the input selection key (corresponding to the input jacks where the device is connected).

For TV: press TV z.

For AV receiver (the unit): press RECEIVER z.For scene: press one of the SCENE keys.

CONFIGURATIONS ➤ Controlling external devices with the remote control En 139