Yamaha AVENTAGE RX-A2020, AVENTAGE RX-A3020 ■Registering the remote control codes for playback devices, Step, 2Press SETUP, ❑TV operations, “OK” appears in the display window

SOURCE RECEIVER

AV

1 2 3 4

5	6				7			V-AUX
			AUDIO
1	2				3		4
PHONO		MULTI			USB			NET
TUNER		[ A ]			[ B ]			[ C ]
			SCENE
1	2				3		4
PROGRAM MUTE						VOLUME
TOP MENU						POP-UP/MENU
ON SCREEN								OPTION
				ENTER
RETURN								DISPLAY
MODE
	CLASSICAL				LIVE			ENTERTAIN
					CLUB
PRESET
		MOVIE			STEREO			STRAIGHT
		TV						PURE
INPUT
								DIRECT
MUTE		TV VOL			TV CH

SUR.	ENHANCER	PARTY	HDMI OUT
DECODE
INFO	MEMORY	FM	AM

Input selection keys

Cursor keys

ENTER

TV operation keys

5Use the numeric keys or cursor keys to enter the 4-digit remote control code and press ENTER.

Once the remote control code is successfully registered, “OK” appears in the display window.

If “ERROR” appears, registration has failed. Repeat from Step 3.6To exit from the setup menu, press SETUP.❑TV operations

Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit.

	INPUT	Switches the video inputs of the TV.
	MUTE	Mutes the audio output of the TV.
TV operation keys TV VOL		Adjust the volume of the TV.
	TV CH	Switch the channels of the TV.
	TV z	Turns on/off the TV.

■Registering the remote control codes for playback devices

You can use the unit’s remote control to operate playback devices if you have registered their remote control codes. You can also use the input selection keys to change the playback devices that are controlled by the remote control, because their remote control codes are assigned to the input selection keys.

1Use “Remote Control Code Search” in the CD-ROM to find the remote control code for your playback device.

•If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes.

2Press SETUP.

Perform each of the following steps within 30 seconds. Otherwise, the setting will be canceled. If this happens, repeat from Step 2.

3Use the cursor keys (q/w) to select “PRESET” and press ENTER.

PRESET

4Press a corresponding input selection key and press ENTER.

For example, press AV1 to set the remote control code for the playback device connected to the AV1 jack.

Code currently registered

5098

5 Use the numeric keys or cursor keys to enter the

1	2	3
			TUN./ CH
4	5	6
				Numeric keys
7	8	9	SLEEP
10	0	ENT	LEVEL
				SETUP
		ZONE	SETUP

•Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI Control-compatible devices connected to the unit with the remote control. (This function may not work depending on the specification of the external device.)

•If you have registered the remote control code for an external device to the [A], [B] or [C] key, you can operate the device with the remote control without switching the input source after pressing the key.

4-digit remote control and press ENTER.

Once the remote control code is successfully registered,

“OK” appears in the display window.

If “ERROR” appears, registration has failed. Repeat from

Step 3.

CONFIGURATIONS ➤ Controlling external devices with the remote control En 137