Yamaha HTR-5940 owner manual Check Ok? ..Yes, Fr, 9Press j / i to select the desired setting

9Press j / i to select the desired setting.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

BASIC SETUP

11Press d/ u to select a speaker and then j/ i to adjust the balance.

The selected speaker and the front left speaker or the surround left speaker output a test tone in turn.

•Press i to increase the value.

•Press j to decrease the value.

PRESET/CH PRESET/CH

CHECK OK? ..YES

Choices: YES, NO

•Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory.

•Select “NO” to proceed to the speaker level adjustment menu to balance the output level of each speaker.

10Press ENTER to confirm your selection.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

•If you selected “YES” in step 9, the setup procedure is completed and the display returns to the top “SET MENU” display.

•If you selected “NO” in step 9, the front speaker level adjustment display appears in the front panel display.

	ENTER		ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

FR --------

•Select “FR” to adjust the balance between the front left and right speakers.

•Select “C” to adjust the balance between the front left and center speakers.

•Select “SL” to adjust the balance between the front left and surround left speakers.

•Select “SB” to adjust the balance between the surround left and surround back speakers.

•Select “SR” to adjust the balance between the surround left and surround right speakers.

•Select “SWFR” to adjust the balance between the front left speaker and the subwoofer.

12Press SET MENU to exit from “BASIC SETUP”.

SET MENU

MENU

SRCH MODE

PREPARATION

29