Yamaha HTR-5940 Selecting the MULTI CH INPUT component, Enjoying unprocessed input sources

t

Selecting the MULTI CH INPUT component

Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 22) as the input source.

Press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” appears in the front panel display.

MULTI CH	MULTI CH IN
INPUT	or

USING OTHER FEATURES

Enjoying unprocessed input sources

When this unit is in the “STRAIGHT” mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing.

1Set the component selector switch to AMP and then press STRAIGHT on the remote control to select “STRAIGHT”.

AMP

STRAIGHT

SOURCE ENT.

Front panel Remote control

MULTI CH INPUT

TV

EFFECT

Note

When “MULTI CH INPUT” is shown in the front panel display, no other source can be played. To select another input source with the INPUT selector on the front panel (or one of the input selector buttons), press MULTI CH INPUT (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” disappears from the front panel display.

Enjoying multi-channel sources in 2-channel stereo

You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo.

Set the component selector switch to AMP and then press STEREO on the remote control repeatedly to select “2ch Stereo”.

AMPSTEREO

SOURCE	1
TV

STRAIGHT

2To deactivate the “STRAIGHT” mode, press STRAIGHT on the remote control again so that “STRAIGHT” disappears from the front panel display.

The sound effect is turned back on.

y

You can also select “STRAIGHT” by pressing STRAIGHT (EFFECT) on the front panel.

OPERATION BASIC

2ch Stereo

y

•You can use a subwoofer with this program when “BASS OUT” is set to “SWFR” or “BOTH” (see page 79).

•You can also select “2ch Stereo” by pressing the

PROGRAM l / h buttons on the front panel.

37